Sonoff BASICR3 RFR3 Benutzerhandbuch Seite 8

RF Remote Controller Pairing
The BASICRFR3 supports the remote controller with 433.92M Hz frequency brand to turn
on/off, and each channel can learn it independently, which is local short-range wireless
control not Wi-Fi control.
Pairing Method:
Long press the pairing button for 3s until the red LED indicator flashes red once, then
short press the remote control button you want to pair for successful learning.
Clearing Method:
Long press the pairing button for 5s until the red LED indicator flashes red twice, then
short press the learned button corresponding to the remote controller to clear code
values of all learned buttons.
Switch Network
If you need to change the network, long press the pairing button for 5s until the Wi-Fi
LED indicator changes in a cycle of two short and one long flash and release, then the
device enters quick pairing mode and you can pair again.
8