Werbung
Verfügbare Sprachen
Verfügbare Sprachen
·
Keep all accessories, such as shelves, door racks, and drawers, in the appliance to minimise energy
consumption.
·
Please read the storage instructions on the food packaging. Always check the storage date.
·
An empty fridge consumes more energy. After all, when the door is opened, warm air enters the space
and needs to be cooled. More air enters when there are fewer products, meaning that more energy
needs to be consumed to cool that air. So fill your fridge properly or choose a model sized for your
needs.
CLEANING AND MAINTENANCE
·
Do not use abrasive cleaning agents or solvents.
·
Turn the appliance off. Disconnect the mains plug from the mains socket.
·
Take out the food and store in a cool location.
·
Clean the appliance with a soft cloth, warm water and detergent.
·
Wipe the door seal with clear water only and then wipe dry thoroughly.
·
After cleaning, put the plug in the socket and set the desired temperature.
·
Put the food back into the appliance.
TROUBLE SHOOTING
Frequently, a problem is minor and a service call may not be necessary, use this trouble shooting guide for
a possible solution.
Does not work
·
Check connection of power cord to power source.
·
Check that the temperature controller is not in the 0 position.
·
Plug in unit.
·
Use proper voltage.
Cools too frequently
·
The temperature setting is too cool.
·
Close door securely.
·
Be sure that food is cool before inserting.
·
Do not keep door open for too long and minimize door openings.
·
Use proper voltage.
·
Do not place unit close to heat sources or direct sunlight.
Internal temperature not cold enough
·
Check connection of power cord to power source.
·
Plug in unit.
·
Check setting and adjust as needed.
·
Close door securely.
·
Be sure that food is cool before inserting.
·
Do not keep door open for too long and minimize door openings.
·
Allow room for air to circulate around unit.
·
Use proper voltage.
·
Do not place unit close to heat sources or direct sunlight.
44
DO91911
Werbung
