Herunterladen Inhalt Inhalt Diese Seite drucken

Linea 2000 DOMO DO91911 Gebrauchsanleitung Seite 41

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

·
Make sure there is sufficient space to open the door.
·
This cooling unit is not intended for use as a built-in appliance.
·
Select a place with a strong, level floor.
·
Avoid direct sunlight and heat. Direct sunlight may affect the acrylic coating. Heat sources nearby will
cause higher electricity consumption.
·
Avoid very moist places. Too much moisture in the air will cause frost to form very quickly on the
evaporator, and your refrigerator.
·
Before connecting your refrigerator to the power supply, check that the voltage stated on the rating
label of your appliance corresponds to the voltage in your home. A different voltage could damage the
appliance.
·
After installation, leave the fridge for 24 hours before turning it on. This way the refrigerant can settle.
·
Allow the appliance to run empty for 8 hours so the compartment can cool to the appropriate
temperature.
·
One can level the appliance using the adjustable legs. The adjustable legs can be adjusted by screwing
them in or out of the appliance.
·
The climate class indicates the minimum and maximum ambient temperature for the proper operation
of an appliance. You can find the climate class on the type plate on the inside or back of the appliance.
·
SN: Subnormal: ambient temperature between 10°C and 32°C
·
N: Normal: ambient temperature between 16°C and 32°C
·
ST: Subtropical: ambient temperature between 16°C and 38°C
·
T: Tropical: ambient temperature between 16°C and 43°C
DOOR CONVERSION
If you need to hinge your door on the
opposite side it is recommended that you
call your local authorised service agent to
make this conversion or ask a technician.
Before you reverse the door, you should
ensure the appliance is unplugged and
empty. After reversing the door, leave
the appliance alone for 8 hours before
switching it on. This allows the coolant to
set.
It is recommended to use a crosshead
screwdriver, a socket driver and a flathead
screwdriver (not supplied).
www.domo-elektro.be
Lift
Lower
16
41
DO91911

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis