S-idee SG1201 Benutzerhandbuch Seite 38

After the car power is turned on, the transmitter and the car will carry out automatic frequency matching.
When the indicator light of the transmitter and the car lights are always on, the frequency matching is
successful. In the process of frequency matching, the car lights will flash rapidly. At this time, the
gyroscope is being calibrated automatically. Please place the car on the level ground to complete this
operation. After calibration, the car lights return to normal.
2>
Steering wheel
Turn left
Throttle trigger
2)
Flip the switch to "ON" to turn on the power.
The lights are flashing to enter the frequency
state. "OFF" turns off the power.
Manipulation method
Go forward
08
Steering wheel
Turn right
Throttle trigger
Brushless
version
Go backward