S-idee SG1201 Benutzerhandbuch Seite 35

Open battery cover at the bottom of transmitter. Install batteries.
Follow the direction of batteries designated in the inside of the battery box.
The battery contains less power when leaving the factory, so it must be charged and saturated before use.
Connect the attached charger with the model battery charging input port, and then connect other USB
output ports. When charging, the charging indicator is flashing, and the indicator is always on after
charging. Do not put the battery in the model when charging. The battery must be cooled before charging.
Battery
input port
Lithium
Battery
XT60
battery
Battery
input port
Please connect the charger box to the charging input port of the model battery, and then connect the
power supply. The battery power indicator is red during charging, and the charging completion indicator
is blue.
▲Please use the charging box provided with the product and make sure it is connected properly.
Warning: someone must be watching while charging.
Assembly of the transmitter battery
Note Direction.
Battery charging
①
Charging
Charger box
POWER
CHARGER
①
Charger
output port
1.5V×4 AA Alkaline Batteries
Charger
output port
Power
E350
05
Battery Cover
②
USB adapter (not included)
②