Status Displays - G&D DVISplitter2-DL Installationsanleitung

Status displays

The LEDs on the device's back panel highlight the operating status of the device.
The blinking modes have the following meaning:
LED Status
Status On
Blinking
Fast blinking
Flashing
Power On
Off
Meaning
Stable »DDC power« signal at video input.
No »DDC power« signal at video input.
DDC learn mode is enabled.
The monitor's DDC information are read in.
The power pack supplies the device with power.
The power pack is not connected, or there is no connection to the
mains voltage.
Status displays
G&D DVISplitter2-DL · 4