Supported Graphic Resolutions - G&D DVISplitter2-DL Installationsanleitung

Supported graphic resolutions

Supported graphic resolutions
The DVISplitter2-DL supports all resolutions that can be transmitted according to
DVI specification. This restriction mainly affects the pixel rate, which can reach
from 25 MHz (single link) to 165 MHz (dual link) or from 165 to 330 MHz.
During single link operation, the common VESA DMT and VESA SMT timing
standards enable resolutions between 640 × 480 pixels at 60 Hz and 1600 × 1200 pix-
els at 60 Hz.
1920 × 1200 pixels at 60 Hz are transmitted according to VESA CVT-RB, 1920 × 1080
pixels at 60 Hz (progressive) are transmitted according to CEA861.
Among other resolutions, dual link operation additionally supports the resolutions
2560 × 1600, 2048 × 2048 and 1920 × 2160 pixels (each at 60 Hz) according to
VESA CVT-RB.
Within the given parameters, you can adjust almost any refresh rate and resolution.
The available display modes depend on the graphics card, the graphics driver, the
operating system and the connected monitor.
The video data that is transmitted from the video source to the DVISplitter2-DL is not
altered when it reaches the monitor.
NOTE:
While generating the video signal, many graphics cards differentiate
between digital and analog output. Such graphics cards create digital image sig-
nals for the DVISplitter2-DL.
Independently of the operating system, some graphics cards therefore scale the
image to the resolution selected at the DDC switch on the DVISplitter2-DL. If nec-
essary, use the DDC switch to select the desired (native) resolution (see page 5).
7 · G&D DVISplitter2-DL