Installation - G&D DVISplitter2-DL Installationsanleitung

Installation

Installation
Connect the DVI cable, the monitors and the power pack to the interfaces described
in the following.
Figure 1: Front panel
Connect a monitor or another DVISplitter2-DL.
DVI-D DL Out 1:
DVI-D DL Out 2: Connect a monitor or another DVISplitter2-DL.
NOTE:
The DVI-D DL Out 1
DDC information of the connected monitor to the video source.
Figure 2: Back panel
DVI CPU: Connect the DVI cable of the video source.
Connect the supplied power pack.
Power In:
Now connect the supplied IEC cable with the power pack and the mains voltage.
3 · G&D DVISplitter2-DL
interface uses the DVI-D DL CPU interface to transmit the