Reading Out A Monitor's Ddc Information - G&D DVISplitter2-DL Installationsanleitung

Switch position DDC profile/function
Def. Transparent transmission of DDC information (standard)
1 2560 × 1600 pixels, 60 Hz (CVT-R)
2 2560 × 1440 pixels, 60 Hz (CVT-R)
3 2048 × 2048 pixels, 60 Hz (CVT-R)
4 1920 × 1200 pixels, 60 Hz (CVT-R)
5 1920 × 1080 pixels, 60 Hz (CEA/DMT)
6 1680 × 1050 pixels, 60 Hz (CVT)
7 1280 × 1024 pixels, 60 Hz (DMT)
User Use the monitor's read-out DDC information
Learn Read out monitr's DDC information

Reading out a monitor's DDC information

In addition to selecting preset DDC information, you can also read out the DDC
information of a monitor to provide it to the computer.
If the monitor's DDC information cannot be transmitted over a long distance due to
a weak signal, the video source can access the DDC information stored in the
DVISplitter2-DL.
How to read out DDC information:
1. Unplug the DVI-D video cable from the
2. Move the DDC switch to the
The status LED shows indicate that the
(see Status displays on page 4).
3. Connect the monitor to the
The LEDs show that the DDC information is read in successfully (see Status
displays on page 4).
4. Remove the monitor cable from the
5. Move the DDC switch to the
The
DVI-D DL CPU
tion to the video source.
position.
Learn
DVI-D DL Out 1
DVI-D DL Out 1
User position.
interface transmits the read-in DDC informa-
Selecting DDC information
interface.
DVI-D DL Out 1
Learn mode is now active
interface to store its DDC information.
interface.
G&D DVISplitter2-DL · 6