ULTIMATE SPEED UKLL 5 A1 Bedienungsanleitung Seite 15

♦ Remove the plug tip (B) from the fuse (A)
and pull out the fuse (A) .
♦ Now, insert a new fuse (A) of the type
F4L/250 V into the car charger .
Place the plug tip (B) onto the slightly
protruding end of the fuse (A) and screw
the previously removed screw insert (C)
back in .
DANGER
► Always use the same type of fuse .
Otherwise there is a risk of fire .
NOTE
If the device still does not work or if the
new fuse burns out immediately, the
device is defective . Please contact the
Service Hotline (see section Service) .
■ 12 │ GB │ IE │ NI
UKLL 5 A1