Vacuuming The Tube Film - Silvercrest SFS 110 A1 Bedienungsanleitung

Vacuuming the tube film
GB
62
You can also suck the air out of the bag (vacuum) during welding:
CAUTION – PROPERTY DAMAGE!
► Do not evacuate bags that contain liquids. These will get into the appliance
and damage it.
1) Lay the open end of the bag as far into the appliance so that the opening of
the bag is located centrally under the lower sealing ring
be inserted no further than the rear limiters
limiters . Otherwise the vacuuming and welding will not function correctly:
2) Close the appliance lid
click closed. If necessary, press them down once again on the markings
and so that the appliance lid
NOTE
► Ensure that the upper
Otherwise the device cannot suck the air out of the bag.
and must lie between the front
. Ensure that both corners of the appliance lid
clicks into place and locks shut.
and the lower sealing rings
. The bag should
are not damaged!
SFS 110 A1