GB
10 mm (3/8" )
Step 4.
•
Remove the screws holding the burners to the base.
•
Slide the burners back and lift up to remove.
6 mm
Step 5.
•
Use a driver to remove the left and right orifices. Replace the left and
right burner orifices with the ones supplied.
If necessary, a small ball of paper can be inserted into the socket of
the driver. This will prevent the orifice from dropping into the bottom
of the socket.
www.napoleongrills.com
x 2
4
x 2
N415-0313 OCT 23.17