2.Remove screw①, then take down cover②
from the top right side. Be careful of the
electrical connector③ below, because it's
still connected. Then unconnect it and
remove cover②.
①
Self-tapping screw
②
Upper hinge cover
①
②
③
3.Press the door switch④ ,then remove it
upward. Install switch④ into cover⑤
(provided in the plastic
cover②
into the plastic bag.
④
4.Disconnect the connetor① and②, then
unscrew screws③ by a 8mm socket driver
or a spanner, and remove hinge④. Then
put the conector① and⑤ into the hole.
Please hold the door by hand when
installing.
②
①
5.Remove the upper door from the middle
hinge by carefully lifting the door straight
up. Then Place the upper door on a smooth
surface with its upper cover upwards.
6.Install cover① (provide in the plastic bag)
on the top right side.Then remove cover②
from top left side of the appliance, and put
it into the plastic bag.
① Screw hole
cover-right
③
Eletrical connector
④
Door switch
③
④
bag). Put the other
⑤ Upper hinge
cover-left
③
④
⑤
② Screw hole
cover-left
7.Remove cover① from the top left side of
upper door and take out connector ②.
Remove cover③ from the right side and
put connector④ inside, reinstall the
cover① and③.
②
①
8.Loose screw③ and take down part②
and part ①, Install replacement door
stopper-left④ and stop block-left⑤
(provided in the plastic bag) to the left
side with screw③. Keep part ① and
part② with the appliance for future
reference.
④
⑤
9.Use the Allen wrench(provided in the
plastic bag) and cross-shaped
screwdriver to loosen the screws and
remove the middle hinge-right. Then
remove the lower door.
10. Place the lower door on a smooth
surface with its panel upwards. Loose
screw③ and take down part② and part①,
then Install door stopper-left④ and stop
block-left⑤ (provided in the plastic bag) to
the left side, and tighten them with screw③
securely.
④
⑤
③
④
① Door stopper
② Stop block
③ Self-tapping screw
①
②
③
④ Door stopper-left
⑤
stop block-left
①
Door stopper
②
Stop block
③
Self-tapping screw
①
②
③
④Door stopper-left
⑤
stop block-left
14