Hella marine NaviLED PRO Installationsanweisung

Warranty Statement
Congratulations! The product you have selected comes from HELLA – one of the world's
leading manufacturers of lighting products. The product comes with a 5 year warranty from
end user purchase covering faults in materials, components or workmanship.
In the unlikely event that you should experience a confirmed warranty related problem with your
purchase, HELLA will, at its discretion, either repair, replace or refund the purchase price of the
product.
Warranty services may be obtained by returning the product within the warranty period to the
HELLA dealer where the product was originally purchased.
This warranty is in addition to and does not preclude any other rights or remedies available to the
consumer under any local legislation related to the provision of goods or services.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced
if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
This warranty does not cover:
1.) Claim/s as a result of normal wear and tear or of any modifications and / or alterations to the product in any
shape or form.
2.) Claim/s as a result of non-compliance of the assembly, service and operating instructions and/or any unfit or
improper use.
3.) Any expenses incurred in the process of making the claim.
Note: For lamps sold in Australia warranty services are provided by HELLA Australia Pty Ltd,
54-76 Southern Rd, Mentone VIC 3194. Customer Service 1800 061 729,
custservice@ha.hella.com, www.hella.com/hella-au/21.html
For general comments about Hella marine products please contact us on E-mail at techfeedback@hellamarine.com
LED Degradation Caused by Service Life Conditions
The luminous intensity of LEDs gradually diminishes over time, even as electricity consumption
remains constant. The rate of decline in luminous intensity is linked to the current output flowing
through the LEDs and their operating temperatures. Hella marine has evaluated the service life
conditions of NavLED navigation lamps to ensure long term safety at sea and compliance with
®
international standards such as ABYC C-5:2021 & ISO 19009:2015.
For continued adherence to the light output criteria outlined in its certification, Hella marine suggests
replacing the NaviLED PRO 3NM Masthead lamp once it has accumulated 25,000 hours of operation.
®
To determine if the service life threshold has been reached, you'll need an estimated annual usage
in hours along with the lamp's production date. The production date is engraved onto the front of the
lens in the following format:
DDMMYY_HHMMSS (Day/Month/Year_Hour/Minute/Second)
For instance, if a lamp with a production date of 140823_153520 is estimated to operate for 1500
hours annually, it's conceivable that the service life threshold will be reached after 16 years of usage
– approximately around 2039.
In the context of typical recreational boating standards, even with regular night sailing, it's unlikely
that the service life threshold will be reached. Additionally it is recommended that regular checks are
made during the service life of the lamp to ensure that there haven't been any LED failures.
INSTRUCTION SHEET: NaviLED
3 Nautical Mile Masthead Lamp
2LT 959 940-2xx
for:
Hella marine LED navigation lamps offer many advantages over conventional bulb lamps.
Significantly reduced power consumption, ultra long life and high tolerance to shock and vibration
make the LED lamps the ideal choice for the harsh marine environment.
The Hella marine NaviLED PRO series are precision optical instruments, tested and type approved
®
to comply with international maritime regulations. They are covered by a 5 year warranty.
Material Description UV resistant lens, high impact resistant shroud
Minimum Visible Vistance 3 Nautical Miles
Vessel Size: Recreational vessels < 20m
Cable Pre-wired with 2.5m of twin core marine cable
Operating Voltage Multivolt
TM
Power Consumption < 2.5W (0.2A@ 12V / 0.1A @ 24V)
Degree of Protection IP 67 – Completely sealed
Weight
250g (including cable)
International Approvals IMO COL REG 72, ISO 19009:2015, EN 60945:2002
RINA Type Approval Certificate No. ELE118523PU
USCG 33 CFR 183.810, ABYC C-5
ABYC C-5 Tested by: Imanna Laboratory (Date: 1/08/2023)
Dimensions
c
c c a a
a
Electromagnetic Compatibility (EMC)
Dimensions Dimensions Dimensions
This LED lamp is an electronic device. The electrical circuits contain components that suppress
a = 87mm / 3.43" a = 87mm / 3.43"
a = 87mm / 3.43"
possible interference, both emission as well as susceptibility, to the limits prescribed in international
regulations. b = 90mm / 3.54" b = 90mm / 3.54"
b = 90mm / 3.54"
c = 57mm / 2.25" c = 57mm / 2.25"
c = 57mm / 2.25"
Protection against damage due to voltage spikes
d = 50mm / 1.97" d = 50mm / 1.97"
d = 50mm / 1.97"
This lamp is protected against reverse polarity connection, positive voltage spikes up
to +500 volts and negative voltage spikes of up to 700 volts.
PRO
®
9-33V DC
c a
Dimensions
a = 87mm / 3.43"
d
d d b b
b
b = 90mm / 3.54"
c = 57mm / 2.25"
d = 50mm / 1.97"
Designed and Manufactured in New Zealand
959 150-02 / 12.23