2.
Turn the circuit breaker to the OFF mode.
3.
Turn the fuel tap open (to the ON mode).
Turn on the motor switch: ON pressed.
4.
Move the choke lever to the "start" mode. If
5.
the engine is still warm, you can skip this
step.
Now gently pull the pull cord until you feel
resistance. This is the compression point.
Run the cord back to its original position
6.
and now pull quickly and firmly until the
engine starts. Repeat several times if
necessary.
WARNING! To avoid accidentally injuring people when pulling out the pull cord, make sure
there are no bystanders (especially children) or pets near you.
35