Tarrington House MWDF5823G Bedienungsanleitung Seite 9

Problem Possible cause
Door and/or
door sealing are
soiled.
Antenna/
receiver of
equipment is
Reception
not adjusted
of radio,
correctly.
television
or similar
Microwave is
equipment is
placed too close
disrupted.
to equipment.
Microwave is
connected to
same socket
outlet as
equipment.
Appliance is
Steam operated in
accumulates a very humid
inside or environment or
around the steam escaped
outside of from food
the door. accumulated on
the door.
Bad odour Inside of
inside microwave must
microwave. be cleaned.
6. Disposal
Environmental Protection
Discarded electric appliances are
recyclable and should not be discarded
in the domestic waste! Please actively
support us in conserving resources and
protecting the environment by returning
this appliance to the collection centres.
Solution
A statutory warranty applies for this product.
Clean door and/
or door sealing.
Damages caused by wrong treatment or operation,
by false placement or storage, improper connection
or installation, as well as force or other external
Readjust
influences are not covered by this warranty. We
antenna/receiver
recommend careful reading of the operating
of equipment.
instructions as it contains important information.
Note:
Move microwave
1. In case this product does not function correctly,
further away
from equipment.
Connect
microwave and
equipment to 2. Please note that, where possible, the following
different socket
outlets.
Wipe door with a
soft cloth.
In the case of a claim for guarantee or defects,
please contact the seller.
For products bought at METRO Cash & Carry India,
a local warranty of two years after purchase date
Clean inside of
applies instead of the above mentioned statutory
microwave. If
warranty.
odour lingers,
combine a cup of
GWL 8/14 EN
water with juice
and skin of one
MWDF5823G
lemon in a deep
bowl. Microwave
for 5 minutes.
Wipe thoroughly
and dry with a
soft cloth.
- 9 -
7. Warranty
please firstly check if there are other reasons,
e.g. for electrical appliances interruption of the
power supply, or generally incorrect handling are
the cause.
documents or rather information should be
provided together with your faulty product:
– Purchase receipt
– Model description/Type/Brand
– Describe the fault and problem as detailed as
possible
ENGLISH
GB
190104