Ferm VCM1007 Originalbetriebsanleitung Seite 10

of complaints. The vapours can irritate the
respiratory system.
d) Use the battery only in conjunction with your
FERM AX-POWER product. This measure
alone protects the battery against dangerous
overload.
e) The battery can be damaged by pointed
objects such as nails or screwdrivers or by
force applied externally. An internal short
circuit can occur and the battery can burn,
smoke, explode or overheat.
SAFETY WARNINGS FOR CHARGER
Intended use
Only charge the recommended 20V Li-ion
rechargeable battery packs. Other types of
batteries may burst causing personal injury and
damage.
a) The appliance is not to be used by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they
have been given supervision or instruction.
b) Children being supervised not to play with
the appliance.
c) Do not recharging non-rechargeable batteries!
d) During charging, batteries must be placed in
the well ventilated area!
Electrical safety
Always check that the voltage of the
power supply corresponds to the voltage
on the rating plate.
• Do not use the machine if the mains cable or
the mains plug is damaged.
• Only use extension cables that are suitable
for the power rating of the machine with a
minimum thickness of 1.5 mm
extension cable reel, always fully unroll the
cable.
2. MACHINE INFORMATION
Intended use
Your handheld vacuum cleaner is suitable for dry
vacuuming with the aid of the accompanying
HEPA filter. The vacuum is not intended for the
vacuum of flammable, explosive or hazardous
dusts. The vacuum cleaner may only be used
10
and stored indoors, in private households and in
enclosed spaces in a domestic environment at
room temperature. The device is not suitable for
commercial or industrial use.
Technical specifications
Model No.
Voltage
Suction force
Container capacity
Tube diameter
Weight
Model No.
Battery type
Voltage
Capacity
Recommended charger
Weight
Model No.
Charger input
Charger output
Rechargeable battery pack
Charging time 1.5Ah battery
Charging time 2.0Ah battery
Charging time 4.0Ah battery
Recommended batteries
Weight
Only use the following batteries of the AX-POWER
20V battery platform. Using any other batteries
could cause serious injury or damage the tool.
CDA1158 20V, 1.5Ah Lithium-Ion
CDA1154 20V, 2Ah Lithium-Ion
CDA1155 20V, 4Ah Lithium-Ion
. If you use an
2
The following charger can be used to charge
these batteries.
CDA1156 Charger adapter
CDA1157 Quick charger
CDA1175 Quick charger
The batteries of the AX-POWER 20V battery
platform are interchangeable with all the FERM
AX-POWER battery platform tools.
VCM1007
20 V
≥7 kPA, 4 m³/min
600 ml
Ø 32 mm
2.3 kg
CDA1154
Lithium-Ion
20V
2.0 Ah
CDA1156, CDA1157,
CDA1175
0.3 kg
CDA1156
100-200V~ 50/60Hz
Max 1A
21.5V 1.7A
20V Li-Ion 1.5Ah
60 minutes
90 minutes
120 minutes
CDA1158, CDA1154,
CDA1155
0,15 kg