ADE KT102 Bedienungsanleitung Seite 40

Using the timer
When timing, you start a countdown. Two
measurements can be taken at the same time.
1. Slide the mode switch to TIMER.
2. Press the TIMER 1 or TIMER 2 button.
The corresponding display indicator starts
to flash.
3. Use HR/+ or MIN/- to set the desired period.
Max. adjustable time: 23 hours and
59 minutes.
If you keep HR/+ or MIN/- pressed,
the displayed values will change
faster.
4. Press START/STOP to start the timer.
Once the set time has elapsed, the timer will
beep for approx. 1 minute.
The corresponding display indicator flashes
and "TIME´S UP" is shown on the display.
40