ADE KT102 Bedienungsanleitung Seite 36

Inserting/changing batteries
For use, you will need two R03 (AAA), 1.5V
batteries.
1. Push in the locking tab and remove the
battery compartment cover.
2. Insert the batteries as shown on the bottom
of the battery compartment. Pay attention
to the correct polarity (+/-).
3. Replace the battery compartment cover and
press it down. The locking tab must audibly
engage.
Notes on changing the battery:
‚ The batteries must be changed when
nothing is shown on the display.
‚ Always replace all batteries.
‚ Only use the battery type specified in the
"Technical Data".
‚ Dispose of old batteries in an environmentally
friendly manner, see "Disposal".
36