Equipment; Operation; Electrical Connection - KKT KOLBE KS1220G Benutzerhandbuch

Operation

Equipment list
Scope of delivery
• 2x adjustable glass shelves
• 1x non-breakable glass plate
above the vegetable drawer
• 3x door shelves
• this user manual
Operation
Clean the appliance before
!
switching
The appliance and the interior parts should
be thoroughly cleaned before use. See inst-
ructions under „Cleaning and care".

Electrical connection

Appliance only to 230 V / 50 Hz AC current via a
!
correctly installed earthed electrical outlet.
In no case may the electronic device to „energy sa-
ving plugs" (eg Sava plug) and inverters that con-
vert direct current to 230 V AC (eg solar systems,
marine systems).
Do not use extension cords. Use an outlet that can
not be turned off with a switch. It is recommended
to connect the unit to a separate circuit.
Switch the device on
Switch on the device at the thermostat, it is lo-
cated on the right side of the interior. To switch
the device, turn the temperature control to „0"
(stop) to the right to the desired cooling tempe-
rature.
12
freezer
light and
control panel
glass shelves
drawer
At initial operation, set the temperature knob to
the highest level. After about one hour the unit has
reached its normal operating temperature and the
unit is operational. The temperature controller can
return to an average level.
The freezer compartment please use only after 3
hours. Refer to „Control Panel" and the following
chapter.
door shelves