Safety Precautions; Intended Use - KKT KOLBE KS1220G Benutzerhandbuch

Safety precautions

Dispose of the packaging material correctly.
All packaging materials can be recycled.
Plastic parts are marked with the standard internati-
onal abbreviations: (e.g. PS for polystyrene, padding
material)
This appliance is identified according to the European
guideline 2002/96/EC on waste electrical and electro-
nic equipment -WEEE.
The guideline specifies the framework for an EU-wide
valid return and re-use of old appliances.
!

Intended Use

• The appliance is suitable for cooling food.
• It is intended for household use.
• If the device is misused or misused, the manufacturer
can not be held responsible for any damage.
!
After transport
• Before you connect the unit to the mains, leave it to
stand for at least 12 hours to allow the coolant to
collect in the compressor. Otherwise, the compressor
may be damaged and cause the unit to fail.
• Failure to observe the rest period will void the warranty.
• Clean the device, especially the inside of the device
(refer to the cleaning section).
2
This icon indicates a hazardous situation.
You'll find it especially with all descriptions of the steps that
might cause danger to persons arising.
Observe these safety instructions and behave accordingly ca-
reful. Enter these warnings also to other users of the device.
!
This icon indicates a warning.
You can find it in the description of the steps that must be ob-
served in order to damage to the unit can be prevented. Ple-
ase include these safety instructions to all device users.
This icon indicates an information.
This symbol indicates useful tips and calls attention to proper
procedure and behavior. The observance of the notes marked
with this icon may save you many problems.
• It complies with the relevant safety regulations for
electrical appliances.
• The refrigeration circuit is tested for leaks.
Remove transport protection:
The device as well as parts of the interior equipment are
protected for transport. Remove all tapes on the right
and left side of the appliance door. You can eliminate
any glue residue with a cleaning gas. Also remove all
adhesive tapes and packaging parts from inside the unit.
Dispose of the packaging environmentally friendly.