KKT KOLBE KS1220G Benutzerhandbuch Seite 28

Installation
Instruction
Screws
Guide
Screws
Guide
8
Slowly and carefully push the appliance into the cabinet. Ensure the ope-
ning side is as close to the cabinet wall as possible.
Screw a guide to holes in the side of appliance door with short screws.
Insert the slider into the guide, then fully open and close appliance door
and wooden door to check whether 0wooden door can close totally and
smoothly.
Open the device door and the door panel at the same time and mark the
position of the slider when the sliding function works well. Now pull the
slider out of the holding plate and screw it to the door panel with two
short screws. Then place the covers on the slider element.
Then unscrew the holder plate from the appliance door.
Repeat these steps for the other slider and cover.
Fit the two guide plates over the sliders and secure them with the short
screws. Then place the guide plate cover on it.