KKT KOLBE KS1220G Benutzerhandbuch Seite 30

Installation
Tool required:
Philips screwdriver, Flat bladed screwdriver,
Hexagonal spanner.
1
2
3
4
10
Unscrew the top hinge. Then lift
the door and place it on a pad-
ded surface to avoid scratching.
Unscrew bottom hinge of
freezer door. Then remove
the door and place it on a
soft pad to avoid scratch.
Move hinge hole cover from
left side to right side.
Hinweise:
!
• Ensure the unit is unplugged and
empty.
• To take the door off, it is necessary to
tilt the unit backwards. You should
rest the unit on something solid so
that it will not slip during the door
reversing process.
• All parts removed must be saved to
do the reinstallation of the door.
• Do not lay the unit flat as this may
damage the coolant system.
• It's better that 2 people handle the
unit during assembly.
Move door holder from left
side to right side.