Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Page EN-18
Troubleshooting table
Troubleshooting table
Malfunctions can occur in all electrical appliances. This does not necessarily mean there is a
defect in the appliance. For this reason, please check the tables to see if you can correct the
malfunction.
WARNING
Risk of electric shock in case of improper repair!
Never try to repair a defective or suspected defective appliance yourself. You can put your
own and future users' lives in danger. Only authorised specialists are allowed to carry out
this repair work.
Problem
Possible cause
No electricity to socket.
Compressor off,
interior light off.
Mains plug is loose.
Desired temperature has
been reached.
Compressor off,
interior light on.
Repositioning.
Appliance cools
Temperature controller is
too quickly.
set at too cold a setting.
Incorrect temperature se-
lected.
Door not tightly closed or
door seal is not completely
tight.
The appliance is near a
heat source.
The appliance
Food has been put in warm. Only put in cooled foods.
doesn't cool suffi-
Too many goods loaded.
ciently.
Ambient temperature too
low or too high.
Compressor seems defec-
tive.
Solutions, tips
Check by connecting another appliance.
Check the tightness of the mains plug.
Further cooling not required. When the
inside temperature rises, the compressor
automatically turns on.
The appliance requires 2 hours to allow
the refrigerant to settle.
Turn down the temperature controller (see
„Operation" on page EN-9).
Turn the temperature controller to a higher
position (see „Operation" on page EN-9).
See „Checking and cleaning door seals"
on page EN-12.
Insert insulating plate in-between or relo-
cate.
Load no more than 7 kg at once.
Adjust the ambient temperature to the
climate category (see „Product fiche con-
cerning Regulation (EU) No 1060/2010" on
page EN-21).
Set the temperature controller to '7'. If the
compressor does not switch on within an
hour, please contact our service centre
(see „Service department" on page EN-20).
Werbung
