Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Problem
Reason
Printer does not turn on
Check that the power cable
and the adapter cable are
correctly plugged into the
power socket.
Check that the printer is
turned on.
Heat shrink tubing can-
Heat shrink tubing jam.
not be pulled through
Heat shrink tubing has run out.
Check that the heat shrink
tubing and the ribbon are
correctly installed.
Printing is unclear or is
The print density setting is
smudged.
wrong for the item.
Check that the heat shrink
tubing matches the ribbon.
Printing is incomplete.
Check whether the print head
is dirty.
Check whether the surface of
the heat shrink tubing and the
ribbon is clean.
9 Disposal
9.1 Product
This symbol must appear on any electrical and electronic equipment placed on the
EU market. This symbol indicates that this device should not be disposed of as
unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and accumulators,
which are not enclosed by the WEEE, as well as lamps that can be removed from
the WEEE in a non-destructive manner, must be removed by end users from the
WEEE in a non-destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back
of waste. Conrad provides the following return options free of charge (more details on our
website):
in our Conrad offices
at the Conrad collection points
at the collection points of public waste management authorities or the collection points set
up by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in
countries outside of Germany.
10 Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Strasse 1, D-92240 Hirschau, hereby declares that this
product complies with the following guidelines:
2014/35/EU
2014/30/EU
It was manufactured in accordance with the following standards:
EN 60204-1:2006+A1:2009
EN 61000-6-3:2007+A1:2011
EN 61000-6-1:2007
EN 61000-3-2:2014
EN 61000-3-3:2013
Click on the following link to read the full text of the EU declaration of conformity:
conrad.com/downloads
Enter the product item number in the search box. You can then download the EU declaration of
conformity in the available languages.
11 Technical data
Solution
11.1 Thermal transfer printer
Reconnect the adapter cable
Operating voltage ......................... 15 V/DC
and the power cable.
Current consumption .................... max. 3 A
Turn the printer on again.
Resolution ..................................... 300dpi
Printing speed ............................... 35 mm/s
Printable width .............................. 55 mm
Remove the heat shrink
Heat shrink tubing diameter .......... 7 to 30 mm (width 12 to 50 mm)
tubing.
USB port ....................................... 2.0 Full Speed
Install the heat shrink tubing
Dimensions ................................... 263 x 165 x 178 mm (L x W x H)
and ribbon correctly.
Weight .......................................... approx. 2.4 kg
Operating conditions ..................... 15 °C to +35 °C, relative humidity 15% to 80%,
Select the correct print
......................................................
density.
Storage conditions ........................ -10 °C to +55 °C, relative humidity 5% to 80%,
Make sure the heat shrink
......................................................
tubing matches the ribbon.
Operating system ......................... Windows XP, Vista, Windows 7/ 8/10/11
Turn the printer off, then
11.2 Power supply unit
use a cotton bud soaked
in alcohol to wipe the print
Operating voltage ......................... 100 to 240 V/AC, 50/60 Hz, approx. 1.5 A
head clean.
Output voltage .............................. 15 V/DC, max. 3 A
Please keep the heat shrink
Operating conditions ..................... 15 °C to +35 °C, relative humidity 15% to 80%,
tubing and the ribbon
......................................................
surface clean.
Storage conditions ........................ -10 °C to +55 °C, relative humidity 5% to 80%,
......................................................
Dimensions ................................... 115 x 46 x 34 mm (L x W x H)
Weight .......................................... approx. 257 g
www.
4
non-condensing
non-condensing
non-condensing
non-condensing
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing in
electronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is
prohibited. This publication reflects the technical status at the time of printing.
Copyright 2022 by Conrad Electronic SE.
*2575508_V2_1222_02_m_VTP_EN
Werbung
