Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. AI detection
Al detection setting steps: "Settings" > "Channel Settings"
> "Al Detection" > "Enable" (Note: "Al detection" is turned on
when leaving the factory, the sensitivity is medium, and the
sensitivity is adjustable.)
① Enable: Turn on/off Al detection.
② Sensitivity: The detection sensitivity can be adjusted to [low,
medium, high]. The detection distance of motion detection
varies depending on the sensitivity setting.
③ Detection type: free Al function, people, vehicles, animals, on
demand You can open the box and check.
④ Defense time: Set the time when the alarm can be detected.
⑤ Alarm mode: detection notification function on/off,
detection recording function on/off
⑥ Set the detection area: Use the selection to specify the area
(the yellow selection shown in the preview is the detection
area). After the area selection is completed, click "Apply".
Setup is complete. Only movement within this area is
detected after a set time.
EN
18
/
Werbung
