Herunterladen Diese Seite drucken

ARDES medicura m215 Bedienungsanleitung Seite 10

Aerosolgeräte mit kolben

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

Do not block or obstruct the air vents of the device and do not place it on
a soft surface such as a bed or sofa.
Do not insert any objects in the cooling vents.
Use only original accessories to guarantee the correct operation of the
device.
The power cable should be extended to its full length to avoid
overheating.
Keep the power cable away from hot surfaces.
If the power cable gets damaged, it has to be replaced only at a service
centre approved by the manufacturer.
If at some time in the future you decide that you will no longer use this
device, it should be made inoperative by cutting the power supply cable,
obviously after removing it from the socket. Dispose the device at a
specialist disposal point. Do not litter!
In case of a breakdown or malfunctioning of the appliance, disconnect it
at once. Do not attempt to repair it, but take it to a service centre
approved by the manufacturer.
If in spite of proper handling malfunctioning should occur, do not try to
operate the appliance, but take it at once to a service centre approved
by the manufacturer: you will find trained staff there which is skilled in
dealing with all kinds of problems.
We recommend personal use of the accessories.
The manufacturer, assembler, installer or importer will be responsible for
safety, performance and reliability only if:
- The assembly, calibration, repair and modification have been carried out by
duly authorised persons;
- The electrical system is in line with the regulations in force;
- The instructions have been followed;
- The manufacturer takes no responsibility for damage caused by incorrect,
improper or unreasonable use or the incorrect use of the accessories.
The device contains a T 1,6A 250V fuse, which can be replaced in the event of
failure. Like any other repairs, the fuse should be replaced by the manufacturer or
persons authorised by him. Before replacing the fuse, remove the plug from the
power supply socket.
Replace the fuse with another having the same electrical specifications.
WARNINGS
RESPONSIBILITIES
SAFETY FUSE

Werbung

loading