Hitachi RAR-5E4 Anleitung Seite 10

FAN OPERATION
User can use the device simply as an air circulator.
6:,1*
(;7(1'('
AUTO SWING OPERATION
6:,1*
(;7(1'('
NOTE
●
During cooling and dehumidi-
fying operation, do not keep
the deflectors swinging or in
the lower position (in the case
of vertical auto swing) for a
long time. It may cause dew
condensation on the deflectors.
EXTENDED AIRFLOW OPERATION
6:,1*
(;7(1'('
P r e s s t h e M O D E s e l e c t o r s o t h a t t h e d i s p l ay i n d i c a t e s
1
(FAN).
Set the desired FAN SPEED with the
display indicates the setting).
2
(HIGH)
START
Press the
Press the button again to stop operation.
STOP
VERTICAL SWING
■ To start Vertical Auto Swing
●
Press (AUTO SWING (VERTICAL)) button. The deflector(s) will start to swing
up and down.
is displayed on the LCD.
■ To cancel Vertical Auto Swing
●
Press (AUTO SWING (VERTICAL)) button again. The deflector(s) will stop in
the current position.
disappeared from the LCD.
■ To start Extended Airflow operation
●
Press (EXTENDED AIRFLOW) button during operation.
" " is displayed on the LCD.
The airflow direction will automatically set according to the type of operation and the fan speed will
change to allow air to blow further. (During cooling operation, fan speed will return to the original
position after 3 hours.)
• If the (EXTENDED AIRFLOW) button is pressed while the AUTO SWING mode is set, the
AUTO SWING mode is cancelled and the EXTENDED AIRFLOW mode is set.
• If the (AUTO SWING) button is pressed while the EXTENDED AIRFLOW mode is set, the
EXTENDED AIRFLOW mode is cancelled and the AUTO SWING mode is set.
• If the (EXTENDED AIRFLOW) button is pressed when the horizontal air deflector stops at
your preferred angle, the deflector will change to EXTENED AIRFLOW.
• Press (EXTENDED AIRFLOW) button to lower the room temperature quickly when the
temperature is high during the cooling operation.
■ To cancel Extended Airflow operation
●
Press (EXTENDED AIRFLOW) button again.
EXTENDED AIRFLOW operation stops.
" " disappears from LCD.
(MED)
(START/STOP) button. Fan operation starts with a beep.
– 10 –
(FAN SPEED) button (the
(LOW) (SILENT)