Kidwell LARO Benutzerhandbuch Seite 10

should be removed since your child start crawling.
• Do not use the product in any manner not specified in the manual.
The figures and photographs are for reference only. The actual appearance of the
SPECIFICATIONS
• Suitable for children who cannot sit.
• Our ergonomic cover guarantees a
proper posture of your child.
• It supports motor development and
coordination
• 3-point seatbelts
• 3-way regulation of reclining of the
rocker.
PARTS OF THE SET
A
Frame of the rocker
B Cover
ASSEMBLY OF THE BABY BOUNCER
1. Slip endings of the pipes of the cover (B) into the bars of the frame of the rocker (A)
as far as possible.
2. Turn the rocker upside down and attach the cover of the seat (B) to the frame of the
rocker (A) with velcro straps.
3. Place the bar (C) into a dedicated hole of the cover frame (B) and attach the toys (D)
with velcro straps.
DISASSEMBLY OF HANDLEBAR AND FRONT WHEELS
1. To regulate the angle of reclining and to fold of the rocker use lock buttons (X) and
(Y).
2. To increase the angle of reclining of the rocker just move the backrest up. The rocker
will be locked automatically on one of 3 available levels.
3. To decrease the angle of reclining of the rocker (to a more lying position) press and
hold the button (X) and lower the backrest down on one of 3 available levels.
4. To fold the rocker to the flat reclined position completely, press and hold the button
(Y) and fold the recline completely down. Then, press and hold the button of the
blockage of the bar and remove the bar with the toys.
10
product may vary from the illustrations shown in the manual.
• Detachable bar with two removable
toys.
• Easy, tool-free assembly.
• Removable cover able to be washed
• Foldable to a compact size.
• Compliance with safety standards EN
12790 and EN 71.
C Bar
D
Toys - 2 pcs.