Axion STIM-PRO Comfort+ Gebrauchsanweisung Seite 12

On/Off Switch & Intensity Control
1
The device can be switched on and off by turning the
intensity knobs on and off. The current intensity can be
decreased or increased by turning the intensity knobs. The
intensity can be adjusted continuously from 0–80 mA per
channel.
EN
Display
2
The display lights up as soon as the device is switched on.
Program select button
3
There are 8 preset TENS programs available. These can
be selected by pressing the "Program" key. The program is
automatically activated 3 seconds after selection.
Timer
4
The device has a timer which can be set for 15, 30, 60 min-
utes and continuous operation C (continue). The activity is
automatically switched off when the time has elapsed.
Battery level indication
5
When the low battery indicator
is shown the battery must be
replaced.
20
TENS – PROGRAMS
Programs 01-08 have preset parameters and have proven
helpful in practice for the body areas mentioned. However,
all programs can also be used for body areas other than
those recommended, as each patient responds individually
to the stimulation. The type of treatment and the choice of
program should be decided with your healthcare
professional according to your pathology.
Positioning the electrodes
The electrodes can be positioned according to the painful
area to be stimulated. We remind you that it is
recommended to consult a health professional to test the
positioning of the electrodes for the best possible pain
relief.
TENS – Programs P 01 – P 08
P 01
Pulse frequency: modulated from 15 Hz
Pulse width: 260 μs
Application duration: adjustable as required
(15, 30 or 60 min.)
Intensity of the current: adjustable as required (0-80 mA)
P 02
Pulse frequency: 100 Hz
Pulse width: 260 μs
Application duration: adjustable as required
(15, 30 or 60 min.)
Intensity of the current: adjustable as required (0-80 mA)
P 03
Pulse frequency: 120 Hz
Pulse width: 260 μs
Application duration: adjustable as required
(15, 30 or 60 min.)
Intensity of the current: adjustable as required (0-80 mA)
STIM-PRO Comfort+
EN
21