Product Description
• Fluorescent Work Light.
• Very robust for use in all kinds of complex environment.
• Easy and time saving fluorescent tube replacement.
• Suitable for various need of lighting in professional areas such as maintenance, outdoor, emergency etc.
Specifications
Article no.:
Operating voltage:
Fluorescent tube:
Light intensity @ 50cm:
Operating temperature range:
Ingress Protection:
Dimensions – including hook (D x L):
Weight:
Cable length:
Cable plug:
Warning
Working safely with this lamp is possible only when the operating and safety information
are read completely and the instructions contained therein are strictly followed.
• Follow the standard safety regulations for working with electrical equipment to reduce the risk of accidents.
• Protect the power cord against oil, heat and edges.
• Don't use the lamp near open flames.
• Disconnect the power cord when replacing the fluorescent lamp.
Fluorescent Tube Replacement
Make sure to disconnect the power before replacing the
tube.
• Remove the endcap.
• Take out the lamp holder and remove the fluorescent tube.
• Place the new fluorescent tube in the power socket.
• Put on the lamp holder.
• Press on the endcap and check the light.
Accessories
Article no.: 03.5016 11W Fluorescent replacement tube.
03.5005
230V AC / 50Hz
11W
300 lux
-10 to +40°C
IP54
Ø50 x 445 mm
0.70 kg
5 m (1 mm² H05RN-F)
Standard European plug