General Information - Anthron Dsdplus Gebrauchsanweisungen

the rope, passing it through the connecting carabiner and
catching with the bight the entire descender (fig.4/D).
Figure 5: ACCOMPANIED DESCENT
This method of evacuation may only be adopted by rescuers
specifically trained in this technique. No impact loading is tolerated. The
rescuer fastens the descender to his harness and connects the injured
person by means of an additional lanyard. Obligatory is the use of a
supplementary braking carabiner as well as the use of gloves.
The rescuer and the injured person must be secured with an additional
independently anchored safety line.
WARNING: With speeds above 1 m/s during rescue operations the
descender may get hot enough to damage the line.

GENERAL INFORMATION

Regular examination:
• Do not hesitate to retire the device if it shows signs of wear (for rope
abrasion see indicator on the pivoting pulley) or after a major fall or a
major impact. They could cause internal or invisible damage that may
significantly weaken its strength. In case of uncertainty treat the
device as damaged or consult ANTHRON.
• Regular periodical inspections should be carried out by an authorised
person at least once a year. For this purpose an inspection record
should be established (see the backside of these instructions).
Furthermore we would sincerely recommend one set of equipment is
used by one person only as its history of use is best traced and
understood in this way.
• Before each use it is obligatory to check the descender and verify that
all its components (handle, jamming cleat, flanges) are faultless and in
good working condition.
Packing, storage, maintenance and cleaning
Each product is packed with its INSTRUCTIONS FOR USE. Proper
maintenance and storage are imperative to ensure correct functioning of
the product (as well as all your equipment) and thus your safety.
Clean the product with a brush under running cold water of domestic
supply. If the stains persist, clean it in warm water (maximum 30°C) with
ordinary soap. Then rinse thoroughly, wipe it with a towel and dry naturally
in a shaded ventilated place away from sources of heat.
If needed, lube sparingly the moving joints of the jamming cleat and handle
with silicon based oil.
Temperatures
While it is allowed to use this product within the temperature range from
-20°C to +60°C, it is advisable to stock it in a dry place at room
temperature.
Lifetime
It is impossible to indicate the exact lifetime of this product for it depends on
frequency and mode of application, on environment where it is used
(marine, cave, corrosive atmosphere), and on mechanical wear or
damage. Provided its correct use (in concordance with these instructions),
the lifetime of the product at average use is expected to be 7 years.
Guarantee and its limitations
This product is guaranteed for 3 years from purchase against any faults in
materials or manufacture. The guarantee does not apply in cases of
misuse, normal wear and tear, unauthorized modifications or alterations,
improper use, improper maintenance, accident, negligence, damage, or if
the product is used for a purpose it was not designed for. If you discover a
defect, you should return the product to the reseller you purchased the
product from or directly to ANTHRON.
ANTHRON is not responsible for the consequences of direct,
indirect, accidental or any other type of damage resulting from the
use of its products.