Lenovo ix2 Schnellstart Handbuch Seite 2

Quick Install
IMPORTANT! Before purchasing or installing drives, check the hard drive compatibility list for your ix2 at
http://support.lenovoemc.com for approved and supported hard drive brands and models.
1. Make sure at least one hard drive is installed in the ix2 device. See the user manual for detailed installation
instructions.
2. Use the included network cable to connect the ix2 device to your network router.
3. Use the included power adapter and cord to plug the ix2 device into a surge-protected power source.
4. The device will power on automatically.
5. Go to http://setup.lenovoemc.com to launch setup for your ix2.
If you cannot access the web setup portal or your device isn't displayed there, start the management interface as
described below to initiate the setup sequence.
Using Your ix2 Network Storage Device
Finding Your ix2 on the Network
You can download and use LenovoEMC
with supported LifeLine storage devices on your network. LenovoEMC Storage Manager is available for Windows
Mac , and Linux computers. A simplified client, LenovoEMC Storage Connector, is preloaded on selected Lenovo
® ®
computers running Windows 7 and 8.1, and can also be downloaded.
If you choose not to use LenovoEMC client software, you can locate and login to Shares on your ix2 using your
computer's operating system (for example, Windows Explorer or Mac Finder). See the user manual for detailed
instructions.
Starting the Management Interface
• From a LenovoEMC client, select Configure features, the Manage menu option, or the settings icon.
• From Windows Explorer, go to Network > Other Devices and double-click the device name.
• From a web browser, enter the device IP address or model name (for example, ix2 or ix2-dl). To use the model
name on a Mac, add .local after the name in the browser (for example, ix2.local).
In order to manage the device, you must first complete the setup sequence, and then login using a valid administrator
user name and password.
Powering off the ix2 / Disconnecting from the Network
You can keep the ix2 powered on for constant use on your network. If you need to disconnect it from your network,
power down using either the power button or the shut down option in the management console.
CAUTION: To prevent data loss, do not disconnect this device or any connected storage devices during data transfer.
Backing up Your ix2 Network Storage
It is recommended that you backup content stored on your ix2 frequently to ensure that your critical data is always
protected. Consult the help files available from the management console for information on how to copy files to other
network locations. You can also use backup software that supports NAS devices.
User Manual and Support Information
The ix2 provides complete instructions in its online help. In addition, a complete user guide, additional configuration
instructions, troubleshooting information, and the latest software downloads for your ix2 are available from the
LenovoEMC web site at http://support.lenovoemc.com.
Safety Information
Observe the following guidelines when performing any work on your ix2 network storage device:
1. Follow all instructions marked on the ix2 and in the documentation.
2. Use only the power supply provided with the ix2 device.
3. Unplug the ix2 device before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for
cleaning.
2
Storage Manager on your client computer to quickly discover and interact
™
,
®