Herunterladen Diese Seite drucken

KED REACH AR-1 Gebrauchsanleitung Seite 14

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

GB
helmet should simply be stored in a dry place.
The helmet should be checked for visible defects at regular intervals.
Small scratches do not affect the protective effect
of your helmet.
Only use original parts for repairs. Please contact your retailer.
9. Safe use
This helmet is only suitable for cycling and roller skating.
It is not suitable for other sports such as skiing or driving motorcycles
and mopeds.
Before starting your trip, ensure the helmet is sitting properly on your
head. The latch system of the chinstrap must always be fully closed.
The straps must be tight. Please also check the same for any children
accompanying you.
The helmet must not be painted, varnished or adorned with stickers!
Paints, varnishes or stickers may contain components that adversely
affect the stability of the helmet and its protective effectiveness.
Do not make any changes to the helmet shell! Never drill into it or screw
objects into it.
In the event of a fall or a stronger impact, the protective effect of the
helmet shell can be severely impaired, even if no external damage can
be seen. You must therefore replace a helmet after an accident and
never use it again! You should replace
the helmet after a maximum of 5 years.
Please travel safely when wearing the helmet and do not
undertake any unnecessary risks.
DO NOT TRAVEL FAST – YOU MAY INJURE YOURSELF!
The protection offered by a helmet depends on the circumstances of
the accident; wearing a protective helmet cannot always prevent a fatal
accident or prolonged disablement.
ALWAYS WEAR A HELMET DURING CYCLING SPORT AND TRAVEL CAUTI-
OUSLY! THE HELMET CAN ONLY PROTECT WHAT IT COVERS!
Always wear the helmet in the correct position. No helmet can protect
the neck or uncovered areas of the head.
WARNING!
HELMETS MUST NOT BE WORN BY CHILDREN DURING
CLIMBING OR OTHER ACTIVITIES IN WHICH THERE IS A
RISK OF STRANGULATION.
14

Werbung

loading

Verwandte Produkte für KED REACH AR-1

Diese Anleitung auch für:

Reach dt-1