Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTRUCTION MANUAL
GB
Thank you for choosing a KED helmet. Protective helmets are personal
protective equipment and help prevent head injuries or at least
significantly reduce them. Please take some time to read the following
information and adjust your helmet. It will benefit your safety and
ensure the highest level of comfort.
Detailed information and illustrations can be found on the
front pages.
1. General Information
This bike helmet represents the best possible protection for
the head against external damage and meets the latest technological
standards. However, no guarantee can be provided for the total preven-
tion of injuries. This bike helmet complies with the European standard
EN 1078.
The helmet complies with the European Regulation (EU) 2016/425 and
therefore bears the CE mark. As part of this standard, the helmets are
tested for shock absorption, the effectiveness of the retention system,
as well as the protection zones and the field of vision.
2. Selecting the right helmet size
A helmet can only protect the wearer if it fits properly. Measure your
head circumference at the widest point and then select the appropriate
size. The dimensions can be found on a label inside the helmet.
The helmet must feel secure and comfortable on the head. Try several
helmets and you will notice some differences right away. Take a look in
the mirror too; the helmet should suit you.
3. Adapting the size adjustment system
A good fit is a prerequisite for the best possible protection. This is why
this helmet is equipped with a K-FIT adjustment system. By turning the
adjustment wheel you can set the head ring to suit you. Turning the
wheel in the '-' direction tightens the head ring, turning the wheel in the
'+' direction loosens the head ring (see illustration 2). The helmet is also
equipped with a height adjustment function (see illustration
5).
4. Correct positioning
Always put your helmet on your head horizontally so that your forehead
is protected but your view is not impaired. Your helmet should also not
sit pushed backwards over the head (see illustration 1).
5. Firm fit
You can check that your helmet is sitting firmly by lightly shaking your
12
Werbung
