Werbung
Verfügbare Sprachen
Verfügbare Sprachen
15-Channel Mode (Default): Every 2 segments as 1 group, 4 groups in total. Channels 1, 2, 3 as shown
under 6-Channel Mode.
CH 1
0 - 21
CH 2
Dimmer (0 - 255)
CH 3
Flash
(0 - 255)
CH 4
R1
CH 5
G1
CH 6
B1
CH 7
R2
CH 8
G2
CH 9
B2
CH 10
R3
CH 11
G3
CH 12
B3
CH 13
CH 14
CH 15
Master/Slave Mode
The master/slave-operation enables that several devices can be synchronized and controlled by one master-
device.
On the rear panel of the LED BRK-12 TCL you can find an XLR-jack and an XLR-plug, which can be used
for connecting several devices.
This device then works as master-device and controls the slave-devices, which are to be connected to the
master-device via a stereo shielded cable. Connect the OUT-jack with the IN-plug of the next device.
Press the MODE button to select the SLAVE mode. The devices set in this manner can now be controlled by
the master unit.
Please press the ENTER button to confirm and to exit the SLAVE Mode.
Sound Control Mode
Press the MODE button and choose Sound Controlled Mode (SOUND).
Press the ENTER button to select the desired sensitivity and frequency of the loops, respectively.
The desired sensitivity (SENS 00-31) and frequency of the loops (Frequency = FQN 01-99) can be selected
via the UP or DOWN buttons.
Please press the ENTER button again to confirm and to exit the SOUND Mode.
CLEANING AND MAINTENANCE
Disconnect from mains before starting maintenance operation!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
All manuals and user guides at all-guides.com
R4
G4
B4
DANGER TO LIFE!
25/26
00054562.DOC, Version 1.2
Werbung
