EuroLite 1913875 Bedienungsanleitung Seite 23

Note: It's necessary to insert the XLR termination plug (with 120 Ohm) in the last lighting in the link in order
to ensure proper transmission on the DMX data link.
Addressing
Press the MODE button until the display shows DMX512 MODE.
Press the ENTER button and the display shows: 001.
Set the desired address via the UP or DOWN buttons.
Please press the ENTER button again to confirm and to select a DMX Channel Mode.
DMX Channel Selection : Choosing a DMX Channel Mode up to 15 Channal Occupation
After having set the desired addresses and pressed ENTER, you can now choose a DMX Channel Mode. (5
CH, 6 CH, 9 CH, 12 CH, 15 CH).
Set the desired mode via the UP or DOWN buttons.
Press the ENTER button again to confirm and to exit the DMX Mode.
Please see the following DMX protocol graphic for the respective channel values.
DMX-Protocol
The LEDs of the devices are separated into 4 LED-segments which can be controlled in the following 5
different modes.
5-Channel Mode: All 4 segments as 1 group
(compatible with EUROLITE DMX LED Operator 1, item no. 70064501 and EUROLITE DMX LED
Operator 4, item no. 70064504)
CH 1 Red (0 - 100 %)
CH 2 Green (0 - 100 %)
CH 3
Blue (0 - 100 %)
CH 4 Dimmer (0-255)
CH 5 0 - 0 On
1 - 5 Sound control (7 colors)
6 - 10 On
11 - 255 Flash (with increasing speed)
All manuals and user guides at all-guides.com
23/26 00054562.DOC, Version 1.2