Herunterladen Diese Seite drucken

HEYLO PV 3000 Betriebsanleitung Seite 27

Vorschau ausblenden Andere Handbücher für PV 3000:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Fan PV 3000
16
Commissioning and
operation
WARNING
Risk of injury and hearing damage
The device can throw around particles from the
environment and cause sound emissions in opera-
tion (see Technical details [ 33]).
a) Wear hearing protection and safety goggles.
Commissioning
a) Make sure that the device is not standing on a
wet base and ensure that it stands upright and
safe.
b) Use the arrow on the device housing to check
that the fan is turning in the correct direction by
briefly switching the device on and immediately
off again on the device switch.
Switching the device on
a) Turn the device switch ON.
The continuous operating mode will start and
the device will run until turned off using this
switch.
The device is now switched on.
Switching the device off
a) Turn the device switch OFF.
The device is now switched off.
See also
Safety [ 23]
27
All manuals and user guides at all-guides.com
17
Observe the following principles if you want to de-
termine the cause of a malfunction Search and mal-
functions and eliminate it:
These tasks may only be carried out by trained and
authorised specialists.
Interventions may only be carried out by the manu-
facturer or by persons authorised by the manufac-
turer during the statutory warranty period.
Safety instructions regarding malfunctions
Danger to life due to electric shock
Touching electrically live parts can be fatal.
Danger due to missing safety covers
Missing safety covers can lead to injuries.
Faults
a) Wear suitable protective clothing.
b) Before recommissioning, install all the safety
devices as attached at the factory.
c) Check that the safety devices are functioning
properly.
d) After completing the task, remove all the tools
and objects from the working area around the
device.
DANGER
a) Switch off the device and disconnect the mains
plug.
CAUTION
a) Before switching on the device, install all the
safety covers that may have been removed for
troubleshooting purposes.
b) Check all the safety devices before switching
on the device.
EN

Werbung

loading

Diese Anleitung auch für:

1110814