Bedienungsanleitung
Operation Manual
8403
IR Mini
IR Mini
DE
1. Wichtige Hinweise
Bitte lesen Sie vor der ersten Anwendung des Produktes bzw.
dessen Einbau diese Bedienungsanleitung aufmerksam durch.
Bewahren Sie diese auf, sie ist Teil des Produktes.
1.1 Sicherheitshinweise
Vorsicht:
Verletzungsgefahr!
Aufgrund der detaillierten Abbildung der vorgesehenen
Verwendung kann das Produkt abbruchgefährdete Teile
aufweisen. Für die Montage sind Werkzeuge nötig.
Stromschlaggefahr!
Die Anschlussdrähte niemals in eine Steckdose einführen!
Verwendetes Versorgungsgerät (Transformator, Netzteil)
regelmäßig auf Schäden überprüfen. Bei Schäden am
Versorgungsgerät dieses keinesfalls benutzen!
Alle Anschluss- und Montagearbeiten nur bei abgeschalteter
Betriebsspannung durchführen!
Ausschließlich nach VDE/EN gefertigte Modellbahntrans-
formatoren verwenden!
Stromquellen unbedingt so absichern, dass es bei einem
Kurzschluss nicht zum Kabelbrand kommen kann.
1.2 Das Produkt richtig verwenden
Dieses Produkt ist bestimmt:
-
Zum Einbau in Modellanlagen und Dioramen.
-
Zum Anschluss an einen Modellbahntransformator
(z. B. Art. 5200), an ein Netzteil mit zugelassener Betriebs-
spannung oder eine Digitalzentrale.
-
Zum Betrieb in trockenen Räumen.
Jeder darüber hinausgehende Gebrauch gilt als nicht bestim-
mungsgemäß. Für daraus resultierende Schäden haftet der
Hersteller nicht.
1.3 Packungsinhalt überprüfen
Kontrollieren Sie den Lieferumfang auf Vollständigkeit:
-
IR Mini mit Anschlusskabeln und 2 IR LEDs
-
Anleitung
CAR
CAR
motion
EN
1. Important information
Please read this manual completely and attentively before us-
ing the product for the first time. Keep this manual. It is part
of the product.
1.1 Safety instructions
Risk of injury!
Due to the intended use, this product can have breakable
parts. Tools are required for installation.
Electrical hazard!
Never put the connecting wires into a power socket! Regu-
larly examine the transformer for damage. In case of any
damage, do not use the transformer.
Make sure that the power supply is switched off when you
mount the device and connect the cables!
Only use VDE/EN tested special model train transformers
for the power supply!
The power sources must be protected to avoid the risk of
burning cables.
1.2 Using the product for its correct purpose
This product is intended:
-
For installation in model train layouts and dioramas.
-
For connection to an authorized model train transformer
(e. g. item 5200), to a power supply unit with approved
operating voltage or a digital command station.
-
For operation in dry rooms only.
Using the product for any other purpose is not approved and is
considered inappropriate. The manufacturer is not responsible
for any damage resulting from the improper use of this product.
1.3 Checking the package contents
Check the contents of the package for completeness:
-
IR Mini with connection cables and 2 IR LEDs
-
Manual
die bewegt!
Caution:
Innovation,