Bauknecht BIK9 PP8TS2 PT Bedienungsanleitung Seite 6

DAILY USE
1. SELECT A FUNCTION
• To switch on the oven, press
anywhere on the screen.
The display allows you to choose between Manual
and My Menu Functions.
• Tap the main function you require to access the
corresponding menu.
• Scroll up or down to explore the list.
• Select the function you require by tapping it.
2. SET MANUAL FUNCTIONS
After having selected the function you require, you
can change its settings. The display will show the
settings that can be changed.
TEMPERATURE / GRILL LEVEL
• Scroll through the suggested values and select the
one you require.
If allowed by the function, you can tap
preheating.
DURATION
You do not have to set the cooking time if you want
to manage cooking manually. In timed mode, the
oven cooks for the length of time you select. At the
end of the cooking time, the cooking is stopped
automatically.
• To set the duration, tap "Set Cook Time".
• Tap the relevant numbers to set the cooking time
you require.
• Tap "NEXT" to confirm.
To cancel a set duration during cooking and so manage
manually the end of cooking, tap the duration value and then
select "STOP".
3. SET MY MENU FUNCTIONS
The My Menu functions enable you to prepare a wide
variety of dishes, choosing from those shown in the
list. Most cooking settings are automatically selected
by the appliance in order to achieve the best results.
• Choose a recipe from the list.
Functions are displayed by food categories in the "MY MENU
FOOD LIST" menu (see relative tables) and by recipe features
in the "MY MENU SPECIAL OCCASIONS" menu.
• Once you have selected a function, simply indicate
the characteristic of the food (quantity, weight,
etc.) you want to cook to achieve the perfect
result.
Some of the My Menu Functions require use of the food
probe. Plug it in before selecting the function. For best results
with the probe, follow the suggestions in the relevant section.
• Follow the on-screen prompts to guide you
through the cooking process.
4. SET START TIME DELAY
You can delay cooking before starting a function: The
function will start at the time you select in advance.
or touch
• Tap "DELAY" to set the start time time you require.
• Once you have set the required delay, tap "START
• Place the food in the oven and close the door: The
To program a delayed cooking start time the oven preheating
phase must be disabled: The oven will reach the temperature
you required gradually, meaning that cooking times will be
slightly longer than those listed in the cooking table.
• To activate the function immediately and cancel
5. START THE FUNCTION
• Once you have configured the settings, tap
If the oven is hot and the function requires a specific
to activate
maximum temperature, a message will shown on the display.
You can change the values that have been set at any time
during cooking by tapping the value you want to amend.
• Press
6. PREHEATING
If previously activated, once the function has been
started the display indicates the status of preheating
phase. Once this phase has been finished, an audible
signal will sound and the display will indicate that the
oven has reached the set temperature.
• Open the door.
• Place the food in the oven.
• Close the door and tap "DONE" to start cooking.
Placing the food in the oven before preheating has finished
may have an adverse effect on the final cooking result.
Opening the door during the preheating phase will pause it.
The cooking time does not include a preheating phase.
You can change the default setting of the preheating
option for cooking functions that allow you to do
that manually.
•
•
7. PAUSING COOKING
Some My Menu functions will require to turn the food
during cooking. An audible signal will sound and the
displays shows the action must to be done.
• Open the door.
• Carry out the action prompted by the display.
• Close the door, then tap "DONE" to resume
Before cooking ends, the oven could prompt you to
check the food in the same way.
An audible signal will sound and the displays shows
the action must to be done.
DELAY" to start the waiting time.
function will start automatically after the period of
time that has been calculated.
the programmed delay time, tap
"START" to activate the function.
to stop the active function at any time.
Select a function that allows you to select the
preheating function manually.
Tap icon to activate or deactivate preheating.
It will be set as a default option.
cooking.
.