Cinq ShiftR Bedienungsanleitung Seite 24

4. Remove the switching unit from the housing. It consists of the shifting
hex cylinder, 2 tooth rings, 2 ratchets and 2 cable seats.
5. The cable seats should be oriented by about 120° to each other in order
to clear the nipples for the removal of the shifter cables.
5.1 If this is not the case, use the catch of the outer demeshing plate as an
tool to reposition the cable seats. Do not use any other tool, as improper
handling might lead to a damaged product.
Proceed as follows:
Place the shifting hex cylinder onto the outer demeshing plate. The
ratchet has to be positioned in front of the catch. Carefull twisting
of the switch unit disengages the ratchet from the tooth ring and allows
a relative repositioning of the cable seats. Pay attention to not bending
any parts such as the catch by improper handling.
24
120°