Werbung
Verfügbare Sprachen
Verfügbare Sprachen
HUB4kQ_F031013_Bil
1. Do not spill any liquids on the equipment and do not drop any objects through the ven-
tilation slots in the equipment.
2. The equipment may be used in dry rooms only.
3. The equipment may be opened, serviced, and repaired by authorized personnel only.
The equipment contains no user-serviceable parts.
4. Before connecting the equipment to power, check that the AC mains voltage stated on
the supplied power supply is identical to the AC mains voltage available where you will
use the equipment.
5. Operate the equipment with the included power supply with an output voltage of 12 VDC
only. Using adapters with an AC output and/or a different output voltage may cause se-
rious damage to the unit.
6. If any solid object or liquid penetrates into the equipment, shut down the sound system
immediately. Disconnect the power supply from the power outlet immediately and have
the equipment checked by AKG service personnel.
7. If you will not use the equipment for a long period of time, disconnect the power supply
from the power outlet. Please note that the equipment will not be fully isolated from
power when you set the power switch to OFF.
8. Do not place the equipment near heat sources such as radiators, heating ducts, or am-
plifiers, etc. and do not expose it to direct sunlight, excessive dust, moisture, rain, me-
chanical vibrations, or shock.
9. To avoid hum or interference, route all audio lines, particularly those connected to the
microphone inputs, away from power lines of any type. If you use cable ducts, be sure
to use separate ducts for the audio lines.
10. Clean the equipment with a moistened (not wet) cloth only. Be sure to disconnect the
power supply from the power outlet before cleaning the equipment! Never use caustic
or scouring cleaners or cleaning agents containing alcohol or solvents since these may
damage the enamel and plastic parts.
11. Use the equipment for the applications described in this manual only. AKG cannot ac-
cept any liability for damages resulting from improper handling or misuse.
1. The power supply will draw a small amount of current even when the equipment is
switched off. To save energy, disconnect the power supply from the power outlet if you
will leave the equipment unused for a long period of time.
2. When scrapping the equipment, separate the case, circuit boards, and cables, and dis-
pose of all components in accordance with local waste disposal rules.
3. The packaging of the equipment is recyclabe. To dispose of the packaging, make sure
to use a collection/recycling system provided for that purpose and observe local legis-
lation relating to waste disposal and recycling.
HUB 4000 Q
05/12/2010
08:54
All manuals and user guides at all-guides.com
Seite 11
(Schwarz/Black Auszug)
Safety
Environment
11
Werbung
