Operation; How To Charge Power Station; How To Charge Battery - Renogy COMPACT-SUITCSE 220 Benutzerhandbuch

How to charge a power station
█
•
Place a solar panel under direct sunlight. Steer clear of objects that can shade the solar panel
and slow down the charging process.
•
Connect the solar connectors of the solar panel with the solar charge cable (sold seperatly),
then Connect DC input port of power station.
•
The solar charge time is highly dependent on the solar irradiance and the ambient tempera-
ture.
•
The operating voltage of the solar panel shall exceed the minimum DC-input voltage of power
station, and the open circuit voltage shall NOT exceed the maximum DC-input voltage of power
station.
How to charge a battery
█
•
Connect COMPACT-SUITCASE
•
Connect the BATT Terminals of charge controller to battery terminals using tray cables (sold
seperately)
•
Set the charging paremeter on charge controller, and the COMPACT-SUITCASE is ready to charge battery.

Operation

connector to PV Terminals of charge controller (sold seperately).
- 06 -