Remote Control; Using The Remote Control - Gold Note PH-1000 Bedienungsanleitung

| REMOTE CONTROL

USING THE REMOTE CONTROL

All the functions and features available on
the PH-1000 can be adjusted using the
remote.
Power ON/OFF
Turns ON and OFF the PH-1000.
Enter
Activates the SELECTION FRAME and selects the
functions, just like you would by pressing the knob.
Input selection
Use IN+ and IN- to change the selected input.
Use IN+ and IN- when the SELECTION FRAME is
red (active selection) to change the function and
set the desired value.
Mute
Mutes the PH-1000.
Volume control
Use VOL+ and VOL- to adjust the volume level of
the headphone output by 1 step at a time. On the
PH-1000 LINE, adjusts the volume when used in
PREAMP mode.
Mode key
By default, the mode key is set to SHIFT+PRE.
Press SHIFT and then PRE on the remote to control
the PH-1000. Check page 13 to learn how you can
change the mode key.
Display
Dimmers the brightness of the display in 4 steps:
100%, 50%, 25%, 0%.
Press Enter to activate the selection frame,
press IN+ and IN- to browse the menu and
adjust the functions.
14
EN
DE
IT