Select Functions - Gold Note PH-1000 Bedienungsanleitung

| SELECT FUNCTIONS

TURNING THE PH-1000 ON/OFF
Turn on the Master Switch on the rear panel
to power the PH-1000, the status LED is red
when in standby. Push the SKC (Single Knob
SERIAL NUMBER:
Rear panel
HOW TO SELECT THE FUNCTIONS
1
Press the knob once to activate the
SELECTION FRAME.
2
Turn the knob left or right until the
desired function is highlighted in white
then press the knob to select it.
Master switch
7
Control) for three seconds to switch on the
PH-1000 and the status LED will turn blue.
Front panel
3
The frame will turn red: now you can turn
the knob to change the function.
4
Press the knob again when the desired
value is set to confirm and exit the
selection.
Turn left or
right to browse
the menu
3 seconds push
Push once