Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Manual IB-2915MSCL-C31
Usage
Clone mode
Important information before you start the cloning process:
The target SSD (Target) must be of the same capacity or bigger
•
than the source SSD (Source).
If the target drive is smaller than the source drive, it is not possib-
•
le to start the clone mode by pressing the button.
•
Cloning creates an identical copy of your drive – there is no need for a
connection to any computer.
•
Since the cloning process copies every single byte of the source drive,
the process may take several hours depending on the drive capacity and
technology.
After the cloning process is complete, the computer may not be
•
able to identify both drives because they are assigned the same
drive letter. To separate the drives, at least one of the SSDs must
be assigned a different drive letter or marked as "online" (under
Windows® it is „disk manager").
•
If only one drive is plugged into Source, there will be no action when you
press the clone button (1).
•
If the target drive (Target) is bigger than the source drive (Source), you may
create a new volume with the remaining space on the target drive after
cloning.
DO NOT connect the computer when the device is in clone mode.
•
Turn on the device with the ON/OFF button (7).
•
Select your preferred clone direction with the clone direction switch (5).
=
=
Werbung
