Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. Diffusion outlet
2. Charge indicator
3. Light
4. Diffusion intensity indicator
5. Diffusion button
6. Empty bottle
We recommend that you place the device in the room for half an hour before turning it on
so that it can reach room temperature.
Step 1: Press the diffusion head to push it out.
Step 2: Unscrew the provided bottle and replace it with your essential oil bottle by removing
the dropper using the tool provided (for 5ml and 10ml bottle only), or fill the provided bottle
with your scented solution.
Step 3: Once the essential oil bottle is securely screwed onto the diffusion head, place it
back into its slot, ensuring that the alignment markers are facing each other.
Note: If the diffusion head does not fit onto your essential oil bottle, or if your bottle does
not fit into the diffuser, the essential oil can be transferred to the empty bottle provided
using an appropriate funnel or pipette (not included). Always be careful not to spill the
essential oil, as it can cause damage to the device, furniture, or other surfaces.
BUTTON ON
• Press and hold the ON button for 1.5 seconds to start the diffusion. The device will launch
the following pre-set program: 60 seconds of diffusion, 120 seconds of pause, and ambient
lighting will activate with color variation for 1 hour.
• Press the button again to change the color of the lighting in the following order: white, red,
yellow, green, warm white, purple, and pink.
• Press and hold the ON button for 1.5 seconds to turn off the device.
DIFFUSION BUTTON
• Press once: 30 sec of diffusion, 150 sec of pause, and the indicator light
• Press twice: 15 sec of diffusion, 165 sec of pause, and the indicator light turns on.
• Press three times: 60 sec of diffusion, 125 sec of pause, and the indicator light
Note that the Diffusion button only works when the device is turned on.
TIMER BUTTON
• Press once to start a 4-hour diffusion time, the indicator light turns on for 4h.
• Press twice to start an 8-hour diffusion time, the indicator light turns on for 8h.
• Press three times to start a 1-hour diffusion time, the indicator light turns on for 1h.
Note that the Timer button only works when the device is turned on.
BATTERY LEVEL INDICATOR
Flashing white light: battery level low, less than 20%.
Flickering white light: device is charging.
Steady white light: charging complete.
The operating time varies depending on the concentration and viscosity of the essential oil,
humidity level, and other external factors.
7. Plug
8. Button ON
9. Timer indicator
10. Timer buttoon
11. USB cable
12. Tool
EN
turns on.
turns on.
9
Werbung
