Videotec WASEX Bedienungsanleitung Seite 9

CAUTION!
Medium level hazard.
This operation is very important for the
system to function properly. Please read
the procedure described very carefully
and carry it out as instructed.
• Ensure the installation meets local specifications.
• Make connections and tests in the laboratory
before carrying out installation on site. Use
appropriate tools for the purpose.
• Check that the power supply socket and cable are
adequately dimensioned.
• Use suitable cables that can withstand the
operating temperatures.
• All disconnected cables must be electrically
isolated.
• Make sure the product is secured to building
before operation.
• The manufacturer declines all liability for damage
to any of the apparatus mentioned in this
handbook, when resulting from tampering, use of
non-original spare parts, installation, maintenance
and repairs performed by non-authorised, non-
skilled personnel.
• For damage to any parts, repair or replacement
must be done by, or under supervision of
VIDEOTEC.
• This product must only be repaired by suitably
trained personnel or under the supervision of
VIDEOTEC personnel in accordance with the
foreseen terms and conditions: IEC/EN60079-19.
• Only use original VIDEOTEC spare parts. Strictly
adhere to the maintenance instructions attached
to each replacement kit.
• For technical services, consult only and exclusively
authorized technicians.
• We strongly recommend using only approved
brackets and accessories during installation.
MNVCWASEX_2404_EN
INFO
Description of system specifications.
We recommend reading this part carefully
in order to understand the subsequent
stages.
• Given the considerable weight of the system, use
an appropriate transport and handling system.
The staff must carry out the handling of the
product in compliance with the common accident
prevention standards.
• Before proceeding with installation, check the
supplied material to make sure it corresponds
to the order specification by examining the
identification labels.
• The equipment is intended for installation in a
Restricted Access Area by specialist technical staff.
• The manufacturer declines all responsibility
for any damage caused by an improper use
of the appliances mentioned in this manual.
Furthermore, the manufacturer reserves the right
to modify its contents without any prior notice.
The documentation contained in this manual has
been collected and verified with great care. The
manufacturer, however, cannot take any liability
for its use. The same thing can be said for any
person or company involved in the creation and
production of this manual.
• Since the user is responsible for choosing the
surface to which the unit is to be anchored, we
do not supply the fixing devices for attaching the
unit firmly to the particular surface. The installer
is responsible for choosing fixing devices suitable
for the specific purpose on hand. Use methods
and materials capable of supporting at least 4
times the weight of the device.
7