8
Right Side Shelf
Attach the fascia to the right side shelf with (2) M5x10 hex bolts, (2)M5 flat washers, and
(1) M4x10 hex bolt with the provided wrench. (A & B)
Hang the right side shelf onto the brackets on right side of the firebox. (C)
Attach the shelf to the firebox as follows:
Fully tighten the pre-installed screws on the right side of the firebox to complete the
attachment of the right side shelf.
M5x10 Hex
Bolt
Qty: 2 pcs
M6x13 Screw
Qty: 3 pcs
A
C
From the inside to the outside of the firebox with (3) M6x13 screws and (3) M6 flat
washers. (D)
IMPORTANT: Make sure the side shelf fascia is aligned with the control panel
before tightening the screws.
From the outside to the inside of the firebox with (1) M4x12 screw. (E)
M5 Flat
Washer
Qty: 2 pcs
M6 Flat Washer
Qty: 3 pcs
M4x10 Hex
Bolt
Qty: 1 pc
D
26
M4x12 Screw
Qty: 1 pc
B
E