Kenmore PG-40405S0L-SE Benutzer- Und Patientensicherheit Seite 22

Front Door
4
 Attach the left and right grease tray brackets to side panels with (8) M4x10 screws. (A)
 Remove the (4) M5x15 screws pre-assembled from the door handle ends, and use them to
attach the handles to the doors. (B)
 Insert the pin at the bottom of each door into the hole on the bottom panel. Insert the pin at
the top of each door through the hole in the door bracket hinge. (C)
IMPORTANT: If the doors do not line up when closed or do not close freely, the hinges
may need to be adjusted. Loosen the hinge screws, adjust the hinge position as
necessary, and retighten the screws. (C)
M4x10 Screw
Qty: 8 pcs
A
C
B
22
Hinge Screws